How are cord locks sized?
By the hole: the cord must pass through when the toggle is squeezed and be held when it is released. Choose single-hole or two-hole, then match the hole diameter to your round cord, or the slot to your flat cord. Cord ends (barrels, bells, beads) finish the tip and stop the cord pulling back through the channel.
What are the main buckle types?
| Buckle | What it does | Typical use |
|---|---|---|
| Side-release | Two parts click together; squeeze the sides to open | Backpacks, pet collars, sports straps |
| Ladder lock | Adjusts strap length, holds under load | Shoulder and backpack straps |
| Tri-glide (slide) | Holds the loose end and allows adjustment | Bag straps, bra straps |
| D-ring / O-ring | Connection point | Bags, belts, lanyards |
| Pin buckle | Prong through holes | Belts, watch and bag straps |
How do I size a buckle?
Buckles are named by the inner width of the strap slot, which equals the webbing width — 20 mm, 25 mm, 32 mm and 38 mm are the usual sizes. Plastic buckles are light and do not rust; metal buckles look premium and suit belts and bags.
See buckles, cord locks and stoppers and the matching webbing.
Quick answers
Is a cord lock the same as a toggle?
Yes, the terms are used for the same spring-loaded part. "Cord stopper" is also common.
Can buckles be made in my colour or with a logo?
Plastic buckles are colour-matched to order and metal hardware can carry an engraved or debossed logo, subject to MOQ.
Last reviewed 2026-11-16 · Related ranges: Buckles & Cord Locks








